// Camera - sx710hs - platform_camera.h // This file contains the various settings values specific to the sx710hs camera. // This file is referenced via the 'include/camera.h' file and should not be loaded directly. // If adding a new settings value put a suitable default in 'include/camera.h', // along with documentation on what the setting does and how to determine the correct value. // If the setting should not have a default value then add it in 'include/camera.h' // using the '#undef' directive along with appropriate documentation. // Override any default values with your camera specific values in this file. Try and avoid // having override values that are the same as the default value. // When overriding a setting value there are two cases: // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive. // 2. If changing the value it is best to use an '#undef' directive to remove the default value // followed by a '#define' to set the new value. // When porting CHDK to a new camera, check the documentation in 'include/camera.h' // for information on each setting. If the default values are correct for your camera then // don't override them again in here. #define CAM_PROPSET 7 #define CAM_HAS_SPORTS_MODE 1 #define CAM_AV_OVERRIDE_IRIS_FIX 1 // for cameras that require _MoveIrisWithAv function to override Av (for bracketing). // doesn't seem to needed // #undef CAM_KEY_PRESS_DELAY // #define CAM_KEY_PRESS_DELAY 60 // delay after a press #define CAM_ADJUSTABLE_ALT_BUTTON 1 #define CAM_ALT_BUTTON_NAMES { "Playback", "Video", "Wifi" } #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_VIDEO, KEY_WIFI} #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1 // default zebra shortcut (left) conflicts with canon AF lock #define SHORTCUT_TOGGLE_ZEBRA KEY_MENU #define CAM_DRYOS 1 #define CAM_DRYOS_2_3_R39 1 #define CAM_DRYOS_2_3_R47 1 #define CAM_HAS_CMOS 1 // unlocked by default, not needed #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO #define CAM_HAS_VIDEO_BUTTON 1 // has disp // #undef CAM_HAS_DISP_BUTTON // no dedicated erase #undef CAM_HAS_ERASE_BUTTON #undef CAM_USE_ZOOM_FOR_MF // not implemented #undef CAM_CHDK_HAS_EXT_VIDEO_MENU #undef CAM_VIDEO_CONTROL // minimal recording or not only #define CAM_SIMPLE_MOVIE_STATUS 1 #define CAM_IS_VID_REC_WORKS 1 // Define if the 'is_video_recording()' function works #define CAM_HAS_JOGDIAL 1 #undef CAM_USE_ZOOM_FOR_MF #undef CAM_UNCACHED_BIT #define CAM_UNCACHED_BIT 0x40000000 // default // #define CAM_CIRCLE_OF_CONFUSION 5 // CoC value for camera/sensor (see http://www.dofmaster.com/digital_coc.html) #define CAM_DNG_LENS_INFO { 45,10,1350,10,32,10,69,10 } #define cam_CFAPattern 0x02010100 // TODO C&P form sx60hs #define cam_CalibrationIlluminant1 17 #define CAM_COLORMATRIX1 \ 15686, 10000, -8326, 10000, -246, 10000, \ -1888, 10000, 10463, 10000, 1645, 10000, \ 286, 10000, 708, 10000, 6145, 10000 #define cam_CalibrationIlluminant2 21 // D65 #define CAM_COLORMATRIX2 \ 13161, 10000, -5451, 10000, -1344, 10000, \ -1989, 10000, 10654, 10000, 1531, 10000, \ -47, 10000, 1271, 10000, 4955, 10000 #define CAM_FORWARDMATRIX1 \ 3002, 10000, 3390, 10000, 3251, 10000, \ 1080, 10000, 6247, 10000, 2674, 10000, \ 341, 10000, 42, 10000, 7868, 10000 #define CAM_FORWARDMATRIX2 \ 3678, 10000, 4352, 10000, 1613, 10000, \ 1429, 10000, 8091, 10000, 480, 10000, \ 577, 10000, 26, 10000, 7648, 10000 #define CAM_RAW_ROWPIX 5344 #define CAM_RAW_ROWS 3950 #define CAM_JPEG_WIDTH 5184 #define CAM_JPEG_HEIGHT 3888 #define CAM_ACTIVE_AREA_X1 96 // normal level at 120 #define CAM_ACTIVE_AREA_Y1 18 // visible pixels start at 17, 18 to keep even, normal level at 22 #define CAM_ACTIVE_AREA_X2 5344 // active area extends to right #define CAM_ACTIVE_AREA_Y2 3950 // active area extends to bottom of image #define PARAM_CAMERA_NAME 3 // found by calling GetImageFolder with single bits sets #define CAM_DATE_FOLDER_NAMING 0x80 #define CAM_FILE_COUNTER_IS_VAR 1 // file counter is variable file_counter_var in stubs, not a param #undef CAM_SENSOR_BITS_PER_PIXEL #define CAM_SENSOR_BITS_PER_PIXEL 12 #define CAM_EXT_TV_RANGE 1 // up to 1024s appears to be supported natively in firmware, exp_drv required for short exposure #undef CAM_EXT_AV_RANGE // up to APEX 864 F22.6 at max zoom, 657 F 10 at wide #define CAM_EXT_AV_RANGE 9 // Number of 1/3 stop increments to extend the Av range beyond the Canon default smallest aperture #define CAM_SHOW_OSD_IN_SHOOT_MENU 1 #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY 1 // Draw pixels on active bitmap buffer only. // seems to be 640x480 #undef CAM_BITMAP_WIDTH #undef CAM_BITMAP_HEIGHT #undef CAM_SCREEN_WIDTH #undef CAM_SCREEN_HEIGHT #define CAM_BITMAP_WIDTH 640 // Actual width of bitmap screen in bytes pixels #define CAM_BITMAP_HEIGHT 480 // Actual height of bitmap screen in rows #define CAM_SCREEN_WIDTH 640 // Width of bitmap screen in CHDK co-ordinates (360 or 480 pre digic 6, actual width for digic 6) #define CAM_SCREEN_HEIGHT 480 // Height of bitmap screen in CHDK co-ordinates (always 240 pre digic 6, actual height for digic 6) #define CAM_SUPPORT_BITMAP_RES_CHANGE 1 // TODO #undef EDGE_HMARGIN #define EDGE_HMARGIN 10 #define CAM_HAS_FILEWRITETASK_HOOK 1 // doesn't appear to use complicated multi pass or seek in normal cases //#define CAM_FILEWRITETASK_SEEKS 1 #define CAM_ZEBRA_NOBUF 1 #undef CAMERA_MIN_DIST #define CAMERA_MIN_DIST 10 // Override min subject distance, min get_focus() value using MF #undef CAMERA_MAX_DIST #define CAMERA_MAX_DIST 1562414 // Override max subject distance, max get_focus() value at max zoom using MF before it goes to -1 //#define CAM_CHDK_HAS_EXT_VIDEO_TIME 1 #undef CAM_USB_EVENTID #define CAM_USB_EVENTID 0x202 // Levent ID for USB control. Changed in DryOS R49, R50 so needs to be overridable. // #define CAM_HAS_MOVIE_DIGEST_MODE 1 // TODO - haven't checked default values #define CAM_NEED_SET_ZOOM_DELAY 300 #define MKDIR_RETURN_ONE_ON_SUCCESS 1 // mkdir() return 1 on success, 0 on fail. #undef REMOTE_SYNC_STATUS_LED // #define REMOTE_SYNC_STATUS_LED 0xC022C30C // TODO specifies an LED that turns on while camera waits for USB remote to sync #define CAM_REMOTE_HDMI_HPD 1 // Camera supports using HDMI hotplug detect for remote signal #define CAM_REMOTE_HDMI_POWER_OVERRIDE 1 // Camera requires HDMI power to be forced on in rec mode #define CAM_REMOTE_ANALOG_AV 1 // Camera supports analog AV detect for remote signal #define CAM_REMOTE_AtoD_CHANNEL 3 // Camera supports using 3rd battery terminal as well as USB for remote - value = A/D channel to poll // sx710 - Open circuit = ~4090, 10k ohm = ~1380?, 3.5k = ~600 (56C as bat temp) #undef CAM_REMOTE_AtoD_THRESHOLD #define CAM_REMOTE_AtoD_THRESHOLD 800 // 3rd battery terminal A/D reading threshold ( lower = 1, higher = 0 ) // camera crashes if sd override used in AF // #define CAM_SD_OVER_IN_AF 1 #define CAM_SD_OVER_IN_AFL 1 #define CAM_SD_OVER_IN_MF 1 // AF led, for MD test code #undef CAM_AF_LED #define CAM_AF_LED 1 #define CAM_HAS_WIFI 1 // Camera has wifi support //--------------------------------------------------