// Camera - sx700hs - platform_camera.h // This file contains the various settings values specific to the SX700HS camera. It was copied over from the SX60HS so some settings may be wrong. // This file is referenced via the 'include/camera.h' file and should not be loaded directly. // If adding a new settings value put a suitable default in 'include/camera.h', // along with documentation on what the setting does and how to determine the correct value. // If the setting should not have a default value then add it in 'include/camera.h' // using the '#undef' directive along with appropriate documentation. // Override any default values with your camera specific values in this file. Try and avoid // having override values that are the same as the default value. // When overriding a setting value there are two cases: // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive. // 2. If changing the value it is best to use an '#undef' directive to remove the default value // followed by a '#define' to set the new value. // When porting CHDK to a new camera, check the documentation in 'include/camera.h' // for information on each setting. If the default values are correct for your camera then // don't override them again in here. #define CAM_PROPSET 6 // allows CHDK raw exception in sports mode #define CAM_HAS_SPORTS_MODE 1 #define CAM_AV_OVERRIDE_IRIS_FIX 1 // for cameras that require _MoveIrisWithAv function to override Av (for bracketing). //#define CAM_HAS_ND_FILTER 1 // Camera has built-in ND filter (in addition to iris) #undef CAM_HAS_ND_FILTER // #undef CAM_KEY_PRESS_DELAY // #define CAM_KEY_PRESS_DELAY 60 // delay after a press #define CAM_ADJUSTABLE_ALT_BUTTON 1 #define CAM_ALT_BUTTON_NAMES { "Playback", "Video", "WiFi"} #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_VIDEO, KEY_WIFI } #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1 // default zebra shortcut (left) conflicts with canon AF lock #define SHORTCUT_TOGGLE_ZEBRA KEY_DUMMY #define CAM_DRYOS 1 #define CAM_DRYOS_2_3_R39 1 #define CAM_DRYOS_2_3_R47 1 #define CAM_HAS_CMOS 1 // unlocked by default, not needed #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO #define CAM_HAS_VIDEO_BUTTON 1 // has disp // #undef CAM_HAS_DISP_BUTTON // no dedicated erase #undef CAM_HAS_ERASE_BUTTON #undef CAM_USE_ZOOM_FOR_MF // not implemented #undef CAM_CHDK_HAS_EXT_VIDEO_MENU #undef CAM_VIDEO_CONTROL // minimal recording or not only #define CAM_SIMPLE_MOVIE_STATUS 1 #define CAM_IS_VID_REC_WORKS 1 // Define if the 'is_video_recording()' function works #define CAM_HAS_JOGDIAL 1 #undef CAM_UNCACHED_BIT #define CAM_UNCACHED_BIT 0x40000000 // Found @0xfc148c98 // default // #define CAM_CIRCLE_OF_CONFUSION 5 // CoC value for camera/sensor (see http://www.dofmaster.com/digital_coc.html) #define CAM_DNG_LENS_INFO { 45,10,1350,10,32,10,69,10 } #define cam_CFAPattern 0x02010100 #define cam_CalibrationIlluminant1 17 // colormatrix copied from SX60 // from CR2 converted to DNG with adobe DNG converter #define CAM_COLORMATRIX1 \ 15686, 10000, -8326, 10000, -246, 10000, \ -1888, 10000, 10463, 10000, 1645, 10000, \ 286, 10000, 708, 10000, 6145, 10000 #define cam_CalibrationIlluminant2 21 // aDobe #define CAM_COLORMATRIX2 \ 13161, 10000, -5451, 10000, -1344, 10000, \ -1989, 10000, 10654, 10000, 1531, 10000, \ -47, 10000, 1271, 10000, 4955, 10000 #define CAM_FORWARDMATRIX1 \ 3002, 10000, 3390, 10000, 3251, 10000, \ 1080, 10000, 6247, 10000, 2674, 10000, \ 341, 10000, 42, 10000, 7868, 10000 #define CAM_FORWARDMATRIX2 \ 3678, 10000, 4352, 10000, 1613, 10000, \ 1429, 10000, 8091, 10000, 480, 10000, \ 577, 10000, 26, 10000, 7648, 10000 #define CAM_RAW_ROWPIX 4768 #define CAM_RAW_ROWS 3516 #define CAM_JPEG_WIDTH 4608 #define CAM_JPEG_HEIGHT 3456 #define CAM_ACTIVE_AREA_X1 96 //?? #define CAM_ACTIVE_AREA_Y1 18 //?? #define CAM_ACTIVE_AREA_X2 4768 #define CAM_ACTIVE_AREA_Y2 3516 #define PARAM_CAMERA_NAME 3 #define CAM_DATE_FOLDER_NAMING 0x80 #define CAM_FILE_COUNTER_IS_VAR 1 // file counter is variable file_counter_var in stubs, not a param #undef CAM_SENSOR_BITS_PER_PIXEL #define CAM_SENSOR_BITS_PER_PIXEL 12 #undef CAM_EXT_TV_RANGE #define CAM_EXT_TV_RANGE 1 #undef CAM_EXT_AV_RANGE // up to APEX 864 F22.6 at max zoom, 657 F 10 at wide #define CAM_EXT_AV_RANGE 9 // Number of 1/3 stop increments to extend the Av range beyond the Canon default smallest aperture #define CAM_SHOW_OSD_IN_SHOOT_MENU 1 #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY 1 // Draw pixels on active bitmap buffer only. #undef CAM_BITMAP_WIDTH #undef CAM_BITMAP_HEIGHT #undef CAM_SCREEN_WIDTH #undef CAM_SCREEN_HEIGHT //following widths could be 736 and 720 #define CAM_BITMAP_WIDTH 640 // Actual width of bitmap screen in bytes pixels #define CAM_BITMAP_HEIGHT 480 // Actual height of bitmap screen in rows #define CAM_SCREEN_WIDTH 640// Width of bitmap screen in CHDK co-ordinates (360 or 480) #define CAM_SCREEN_HEIGHT 480 // Height of bitmap screen in CHDK co-ordinates (always 240 on all cameras so far) // #define CAM_SUPPORT_BITMAP_RES_CHANGE 1 #undef EDGE_HMARGIN #define EDGE_HMARGIN 10 #define CAM_HAS_FILEWRITETASK_HOOK 1 //#define CAM_FILEWRITETASK_SEEKS 1 #define CAM_ZEBRA_NOBUF 1 #define CAM_QUALITY_OVERRIDE 1 #undef CAMERA_MIN_DIST #define CAMERA_MIN_DIST 10 // Override min subject distance #undef CAMERA_MAX_DIST #define CAMERA_MAX_DIST 1562414 // Override max subject distance; manually checked up to 1550388, with MF max 1369863 (double step) #undef CAM_HAS_GPS //#define CAM_CHDK_HAS_EXT_VIDEO_TIME 1 #undef CAM_USB_EVENTID #define CAM_USB_EVENTID 0x202 // Levent ID for USB control. Changed in DryOS R49, R50 so needs to be overridable. // #define CAM_HAS_MOVIE_DIGEST_MODE 1 #define CAM_NEED_SET_ZOOM_DELAY 300 #define MKDIR_RETURN_ONE_ON_SUCCESS 1 // mkdir() return 1 on success, 0 on fail. #undef REMOTE_SYNC_STATUS_LED // #define REMOTE_SYNC_STATUS_LED 0xC022C30C // TODO specifies an LED that turns on while camera waits for USB remote to sync // camera crashes if sd override used in AF //#define CAM_SD_OVER_IN_AF 1 #define CAM_SD_OVER_IN_AFL 1 #define CAM_SD_OVER_IN_MF 1 // AF led, for MD test code #undef CAM_AF_LED #define CAM_AF_LED 1 #define CAM_HAS_WIFI 1 // Camera has wifi support //-------------------------------------------------- // From tests #define CAM_MARKET_ISO_BASE 200