// Camera - sx530hs - platform_camera.h // This file contains the various settings values specific to the sx530hs camera. // This file is referenced via the 'include/camera.h' file and should not be loaded directly. // If adding a new settings value put a suitable default in 'include/camera.h', // along with documentation on what the setting does and how to determine the correct value. // If the setting should not have a default value then add it in 'include/camera.h' // using the '#undef' directive along with appropriate documentation. // Override any default values with your camera specific values in this file. Try and avoid // having override values that are the same as the default value. // When overriding a setting value there are two cases: // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive. // 2. If changing the value it is best to use an '#undef' directive to remove the default value // followed by a '#define' to set the new value. // When porting CHDK to a new camera, check the documentation in 'include/camera.h' // for information on each setting. If the default values are correct for your camera then // don't override them again in here. // propset 8, new for this camera. See development thread https://chdk.setepontos.com/index.php?topic=12418.msg127109#msg127109 #define CAM_PROPSET 8 #define CAM_DRYOS 1 #define CAM_DRYOS_2_3_R39 1 // Defined for cameras with DryOS version R39 or higher #define CAM_DRYOS_2_3_R47 1 // Defined for cameras with DryOS version R47 or higher #undef CAM_CIRCLE_OF_CONFUSION #define CAM_CIRCLE_OF_CONFUSION 6 // CoC value for camera/sensor (see http://www.dofmaster.com/digital_coc.html) #define CAM_RAW_ROWPIX 4768 // Found @0xff196e7c #define CAM_RAW_ROWS 3516 // Found @0xff196e88 #define CAM_JPEG_WIDTH 4608 // from canon specs #define CAM_JPEG_HEIGHT 3456 #define CAM_ACTIVE_AREA_X1 96 #define CAM_ACTIVE_AREA_Y1 16 #define CAM_ACTIVE_AREA_X2 4768 // active all the way to the edge #define CAM_ACTIVE_AREA_Y2 3516 // active all the way to the bottom #undef CAM_UNCACHED_BIT #define CAM_UNCACHED_BIT 0x40000000 // Found @0xff025c5c #undef CAM_SENSOR_BITS_PER_PIXEL #define CAM_SENSOR_BITS_PER_PIXEL 12 #define CAM_DNG_LENS_INFO { 43,10, 2150, 10, 34,10, 65, 10 } // See comments in camera.h #define cam_CFAPattern 0x02010100 // Red Green Green Blue // TODO C&P from D10 #define CAM_COLORMATRIX1 \ 14052, 10000, -5229, 10000, -1156, 10000, \ -1325, 10000, 9420, 10000, 2252, 10000, \ -498, 10000, 1957, 10000, 4116, 10000 #define cam_CalibrationIlluminant1 21 // D65 #undef CAM_HAS_CMOS #define CAM_HAS_CMOS 1 #undef CAM_USE_ZOOM_FOR_MF #define CAM_HAS_VIDEO_BUTTON 1 #undef CAM_HAS_DISP_BUTTON // long shutter is actually user TV, may work ? #undef CAM_HAS_USER_TV_MODES #define CAM_SHOW_OSD_IN_SHOOT_MENU 1 #undef CAM_VIDEO_CONTROL // #define CAM_VIDEO_QUALITY_ONLY 1 #define CAM_HAS_MOVIE_DIGEST_MODE 1 //Camera doesn't actually have MOVIE_DIGEST_MOVIE, but this is required by is_video_recording. //See http://chdk.setepontos.com/index.php?topic=9986.msg118892#msg118892 //#define CAM_IS_VID_REC_WORKS 1 // is_video_recording() function works #undef CAM_IS_VID_REC_WORKS // TODO // #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1 #undef CAM_AF_SCAN_DURING_VIDEO_RECORD #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO // unlocked in canon firmware by default #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1 // MakeDirectory_Fut not found, using mkdir #define MKDIR_RETURN_ONE_ON_SUCCESS //aspect correction #undef CAM_USES_ASPECT_CORRECTION #define CAM_USES_ASPECT_CORRECTION 1 #undef CAM_BITMAP_WIDTH #define CAM_BITMAP_WIDTH 960 // Actual width of bitmap screen in bytes (may be larger than displayed area) #undef CAM_BITMAP_HEIGHT #define CAM_BITMAP_HEIGHT 270 // Actual height of bitmap screen in rows (240 or 270) #define CAM_HAS_JOGDIAL 1 #define CAM_ADJUSTABLE_ALT_BUTTON 1 #define CAM_ALT_BUTTON_NAMES { "Playback", "Video", "Wifi" } #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_VIDEO, KEY_WIFI } // TODO #undef CAM_USB_EVENTID #define CAM_USB_EVENTID 0x202 // Levent ID for USB control. Changed in DryOS R49 so needs to be overridable. #define CAM_DATE_FOLDER_NAMING 0x080 #define PARAM_CAMERA_NAME 3 // parameter number for GetParameterData #undef CAM_FILE_COUNTER_IS_VAR #define CAM_FILE_COUNTER_IS_VAR 1 // file counter is variable file_counter_var in stubs, not a param //#define CAM_HAS_FILEWRITETASK_HOOK 1 // FileWriteTask hook is available (local file write can be prevented) #undef CAM_HAS_FILEWRITETASK_HOOK //#define CAM_FILEWRITETASK_SEEKS 1 // Camera's FileWriteTask can do Lseek() - DryOS r50 or higher, the define could also be CAM_DRYOS_2_3_R50 #undef CAM_FILEWRITETASK_SEEKS #define CAM_NEED_SET_ZOOM_DELAY 300 // only non-AF led available // CHDK doesn't currently (April 2016) support REMOTE_SYNC_STATUS_LED on DIGIC 4+ / 5 / 6 cameras // #define REMOTE_SYNC_STATUS_LED 0xC022D1FC // specifies an LED that turns on while camera waits for USB remote to sync #undef CAM_AF_LED #define CAM_AF_LED 1 #undef CAM_KEY_PRESS_DELAY #define CAM_KEY_PRESS_DELAY 120 // delay after a press - Required by zoom_in/zoom_out buttons #define SHORTCUT_TOGGLE_ZEBRA KEY_MENU #define CAM_SD_OVER_IN_AF 1 #define CAM_SD_OVER_IN_AFL 1 #define CAM_SD_OVER_IN_MF 1 #define CAM_MIN_ISO_OVERRIDE 100 // https://chdk.setepontos.com/index.php?topic=12314.msg128518#msg128518 #define CAM_MAX_ISO_OVERRIDE 3200 // https://chdk.setepontos.com/index.php?topic=12314.msg128683#msg128683 #undef DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY //jeronymo #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY 1 #define CAM_3ARG_DebugAssert 1 // DebugAssert takes 3 arguments #define CAM_HAS_WIFI 1 // Camera has wifi support //---------------------------------------------------------- #undef CAM_DEFAULT_MENU_CURSOR_BG #undef CAM_DEFAULT_MENU_CURSOR_FG #define CAM_DEFAULT_MENU_CURSOR_BG IDX_COLOR_RED // Override menu cursor colors #define CAM_DEFAULT_MENU_CURSOR_FG IDX_COLOR_WHITE // Override menu cursor colors