// Camera - sx510hs - platform_camera.h

// This file contains the various settings values specific to the sx510hs camera.
// This file is referenced via the 'include/camera.h' file and should not be loaded directly.

// If adding a new settings value put a suitable default in 'include/camera.h',
// along with documentation on what the setting does and how to determine the correct value.
// If the setting should not have a default value then add it in 'include/camera.h'
// using the '#undef' directive along with appropriate documentation.

// Override any default values with your camera specific values in this file. Try and avoid
// having override values that are the same as the default value.

// When overriding a setting value there are two cases:
// 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
// 2. If changing the value it is best to use an '#undef' directive to remove the default value
//    followed by a '#define' to set the new value.

// When porting CHDK to a new camera, check the documentation in 'include/camera.h'
// for information on each setting. If the default values are correct for your camera then
// don't override them again in here.

    #define CAM_PROPSET                     6
    #define CAM_DRYOS                       1
    #define CAM_DRYOS_2_3_R39               1 // Defined for cameras with DryOS version R39 or higher
    #define CAM_DRYOS_2_3_R47               1 // Defined for cameras with DryOS version R47 or higher

    #undef  CAM_CIRCLE_OF_CONFUSION
    #define CAM_CIRCLE_OF_CONFUSION         6   // CoC value for camera/sensor (see http://www.dofmaster.com/digital_coc.html)

    #define CAM_RAW_ROWPIX                  4168 // Found @0xff196e7c
    #define CAM_RAW_ROWS                    3062 // Found @0xff196e88

    #define CAM_JPEG_WIDTH                  4000 // from canon specs
    #define CAM_JPEG_HEIGHT                 3000 

    #define CAM_ACTIVE_AREA_X1              96
    #define CAM_ACTIVE_AREA_Y1              18 // there are values at 17 but keep even to avoid CFA issues
    #define CAM_ACTIVE_AREA_X2              4168 // active all the way to the edge
    #define CAM_ACTIVE_AREA_Y2              3062 // active all the way to the bottom

    #undef  CAM_UNCACHED_BIT
    #define CAM_UNCACHED_BIT                0x40000000 // Found @0xff005f4c

    #undef CAM_SENSOR_BITS_PER_PIXEL
    #define CAM_SENSOR_BITS_PER_PIXEL       12

    #define CAM_DNG_LENS_INFO               { 43,10, 1290, 10, 34,10, 58,10 } // See comments in camera.h

    #define cam_CFAPattern                  0x02010100 // Red Green Green Blue

    // TODO C&P from D10
    #define CAM_COLORMATRIX1                        \
      14052, 10000,   -5229, 10000,   -1156, 10000, \
      -1325, 10000,    9420, 10000,    2252, 10000, \
       -498, 10000,    1957, 10000,    4116, 10000
    #define cam_CalibrationIlluminant1      21      // D65

    #undef  CAM_USE_ZOOM_FOR_MF

    #define CAM_HAS_VIDEO_BUTTON            1

    // long shutter is actually user TV, may work ?
    #undef  CAM_HAS_USER_TV_MODES
    #define CAM_SHOW_OSD_IN_SHOOT_MENU      1

    #undef  CAM_VIDEO_CONTROL
// not working
    #undef CAM_CHDK_HAS_EXT_VIDEO_MENU
//    #define CAM_VIDEO_QUALITY_ONLY            1
//    #define CAM_CHDK_HAS_EXT_VIDEO_MENU       1
    #define CAM_HAS_MOVIE_DIGEST_MODE       1   //See http://chdk.setepontos.com/index.php?topic=9986.msg118892#msg118892
    #define CAM_IS_VID_REC_WORKS            1   // is_video_recording() function works    

    // TODO
//    #define CAM_AF_SCAN_DURING_VIDEO_RECORD   1

    #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO  // unlocked in canon firmware by default

    // MakeDirectory_Fut not found, using mkdir
    #define MKDIR_RETURN_ONE_ON_SUCCESS

    //aspect correction
    #undef  CAM_USES_ASPECT_CORRECTION
    #define CAM_USES_ASPECT_CORRECTION      1
    #undef  CAM_BITMAP_WIDTH
    #define CAM_BITMAP_WIDTH                960 // Actual width of bitmap screen in bytes (may be larger than displayed area)
    #undef  CAM_BITMAP_HEIGHT
    #define CAM_BITMAP_HEIGHT               270 // Actual height of bitmap screen in rows (240 or 270)

    #define CAM_LOAD_CUSTOM_COLORS          1     // Enable loading CHDK colors into the camera palette memory/hardware

    #define CAM_HAS_JOGDIAL                 1
    #define CAM_ADJUSTABLE_ALT_BUTTON       1
    #define CAM_ALT_BUTTON_NAMES            { "Playback", "Disp", "Video" }
    #define CAM_ALT_BUTTON_OPTIONS          { KEY_PLAYBACK, KEY_DISPLAY, KEY_VIDEO }

    // TODO
    #undef  CAM_USB_EVENTID
    #define CAM_USB_EVENTID                 0x202 // Levent ID for USB control. Changed in DryOS R49 so needs to be overridable.

    #define CAM_DATE_FOLDER_NAMING          0x80

    #define PARAM_CAMERA_NAME               3 // parameter number for GetParameterData

    #define CAM_FILE_COUNTER_IS_VAR         1 // file counter is variable file_counter_var in stubs, not a param

    #define  CAM_HAS_FILEWRITETASK_HOOK     1 // FileWriteTask hook is available (local file write can be prevented)
    #define  CAM_FILEWRITETASK_SEEKS        1 // Camera's FileWriteTask can do Lseek() - DryOS r50 or higher, the define could also be CAM_DRYOS_2_3_R50


//  only non-AF led available
    #define REMOTE_SYNC_STATUS_LED          0xC022302C  // specifies an LED that turns on while camera waits for USB remote to sync

    #undef CAM_AF_LED
    #define CAM_AF_LED                      1

    #undef  CAM_KEY_PRESS_DELAY
    #define CAM_KEY_PRESS_DELAY             120  // delay after a press - Required by zoom_in/zoom_out buttons

    #define CAM_SD_OVER_IN_AF               1
    #define CAM_SD_OVER_IN_AFL              1
    #define CAM_SD_OVER_IN_MF               1

    #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY 1

    #define CAM_3ARG_DebugAssert                1   // DebugAssert takes 3 arguments

    #define CAM_HAS_WIFI                        1   // Camera has wifi support

//----------------------------------------------------------