// Camera - sx270hs / sx275hs / sx280hs - platform_camera.h // This file contains the various settings values specific to the SX280HS camera. // This file is referenced via the 'include/camera.h' file and should not be loaded directly. // If adding a new settings value put a suitable default in 'include/camera.h', // along with documentation on what the setting does and how to determine the correct value. // If the setting should not have a default value then add it in 'include/camera.h' // using the '#undef' directive along with appropriate documentation. // Override any default values with your camera specific values in this file. Try and avoid // having override values that are the same as the default value. // When overriding a setting value there are two cases: // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive. // 2. If changing the value it is best to use an '#undef' directive to remove the default value // followed by a '#define' to set the new value. // When porting CHDK to a new camera, check the documentation in 'include/camera.h' // for information on each setting. If the default values are correct for your camera then // don't override them again in here. #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE 1 // there's no low light mode, so just in case #define CAM_AV_OVERRIDE_IRIS_FIX 1 #undef CAM_KEY_PRESS_DELAY #define CAM_KEY_PRESS_DELAY 60 // delay after a press #define CAM_ADJUSTABLE_ALT_BUTTON 1 #define CAM_ALT_BUTTON_NAMES { "Playback", "Video", "Display" } #define CAM_ALT_BUTTON_OPTIONS { KEY_PLAYBACK, KEY_VIDEO, KEY_DISPLAY } #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1 // default zebra shortcut (LEFT) conflicts with canon AF lock #define SHORTCUT_TOGGLE_ZEBRA KEY_MENU #define CAM_DRYOS 1 #define CAM_DRYOS_2_3_R39 1 #define CAM_DRYOS_2_3_R47 1 #define CAM_PROPSET 6 #define CAM_RAW_ROWPIX 4176 #define CAM_RAW_ROWS 3062 #define CAM_HAS_CMOS 1 //#undef CAM_CHDK_HAS_EXT_VIDEO_MENU #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO #define CAM_HAS_VIDEO_BUTTON 1 #define CAM_MOVIEREC_NEWSTYLE 1 #undef CAM_VIDEO_CONTROL #define CAM_HAS_JOGDIAL 1 #undef CAM_USE_ZOOM_FOR_MF #undef CAM_UNCACHED_BIT #define CAM_UNCACHED_BIT 0x40000000 #define CAM_DNG_LENS_INFO { 45,10,900,10,35,10,68,10 } #define cam_CFAPattern 0x02010100 #define CAM_COLORMATRIX1 \ 544808, 1000000, -174047, 1000000, -80399, 1000000, \ -75055, 1000000, 440444, 1000000, 11367, 1000000, \ -5801, 1000000, 71589, 1000000, 118914, 1000000 #define cam_CalibrationIlluminant1 17 #define CAM_JPEG_WIDTH 4000 #define CAM_JPEG_HEIGHT 3000 #define CAM_ACTIVE_AREA_X1 96 #define CAM_ACTIVE_AREA_Y1 18 #define CAM_ACTIVE_AREA_X2 4168 #define CAM_ACTIVE_AREA_Y2 3062 #define PARAM_CAMERA_NAME 3 #define CAM_DATE_FOLDER_NAMING 0x80 #define CAM_FILE_COUNTER_IS_VAR 1 // file counter is variable file_counter_var in stubs, not a param #undef CAM_SENSOR_BITS_PER_PIXEL #define CAM_SENSOR_BITS_PER_PIXEL 12 #define CAM_EXT_TV_RANGE 1 #undef CAM_HAS_ERASE_BUTTON #define CAM_SHOW_OSD_IN_SHOOT_MENU 1 #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY 1 // Draw pixels on active bitmap buffer only. //#undef CAM_USES_ASPECT_CORRECTION //#define CAM_USES_ASPECT_CORRECTION 1 #undef CAM_BITMAP_WIDTH #undef CAM_BITMAP_HEIGHT #undef CAM_SCREEN_WIDTH #undef CAM_SCREEN_HEIGHT #define CAM_BITMAP_WIDTH 640 // Actual width of bitmap screen in bytes pixels #define CAM_BITMAP_HEIGHT 480 // Actual height of bitmap screen in rows #define CAM_SCREEN_WIDTH 640 // Width of bitmap screen in CHDK co-ordinates (360 or 480) #define CAM_SCREEN_HEIGHT 480 // Height of bitmap screen in CHDK co-ordinates (always 240 on all cameras so far) #define CAM_SUPPORT_BITMAP_RES_CHANGE 1 #undef EDGE_HMARGIN #define EDGE_HMARGIN 10 #define CAM_HAS_FILEWRITETASK_HOOK 1 //#define CAM_FILEWRITETASK_SEEKS 1 #define CAM_ZEBRA_NOBUF 1 //#define CAM_QUALITY_OVERRIDE 1 #undef CAMERA_MIN_DIST #define CAMERA_MIN_DIST 100 // Override min subject distance #undef CAMERA_MAX_DIST #define CAMERA_MAX_DIST 1550000 // Override max subject distance; manually checked up to 1550388, with MF max 1369863 (double step) // sx280 has GPS, but full support is not enabled #if PLATFORMID == 12895 //#define CAM_HAS_GPS 1 #endif //#define CAM_CHDK_HAS_EXT_VIDEO_TIME 1 #define CAM_SIMPLE_MOVIE_STATUS 1 #undef CAM_USB_EVENTID #define CAM_USB_EVENTID 0x202 // Levent ID for USB control. Changed in DryOS R49, R50 so needs to be overridable. #define CAM_HAS_MOVIE_DIGEST_MODE 1 #define CAM_NEED_SET_ZOOM_DELAY 300 #define MKDIR_RETURN_ONE_ON_SUCCESS 1 // mkdir() return 1 on success, 0 on fail. #undef REMOTE_SYNC_STATUS_LED // #define REMOTE_SYNC_STATUS_LED 0xC022C30C // TODO specifies an LED that turns on while camera waits for USB remote to sync // AF led, for MD test code #undef CAM_AF_LED #define CAM_AF_LED 1 #define CAM_SD_OVER_IN_AF 1 #define CAM_SD_OVER_IN_MF 1 // sx270 shares same firmware + CHDK source but does not have WIFI hardware #if PLATFORMID != 12896 #define CAM_HAS_WIFI 1 // Camera has wifi support #endif //--------------------------------------------------