// Camera - SX170IS - platform_camera.h

// This file contains the various settings values specific to the SX170IS camera.
// This file is referenced via the 'include/camera.h' file and should not be loaded directly.

// If adding a new settings value put a suitable default in 'include/camera.h',
// along with documentation on what the setting does and how to determine the correct value.
// If the setting should not have a default value then add it in 'include/camera.h'
// using the '#undef' directive along with appropriate documentation.

// Override any default values with your camera specific values in this file. Try and avoid
// having override values that are the same as the default value.

// When overriding a setting value there are two cases:
// 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
// 2. If changing the value it is best to use an '#undef' directive to remove the default value
//    followed by a '#define' to set the new value.

// When porting CHDK to a new camera, check the documentation in 'include/camera.h'
// for information on each setting. If the default values are correct for your camera then
// don't override them again in here.

    #define CAM_PROPSET                     6
    #define CAM_DRYOS                       1
    #define CAM_DRYOS_2_3_R39               1       // Defined for cameras with DryOS version R39 or higher
    #define CAM_DRYOS_2_3_R47               1       // Defined for cameras with DryOS version R47 or higher

    #undef  CAM_CIRCLE_OF_CONFUSION
    #define CAM_CIRCLE_OF_CONFUSION         6   // CoC value for camera/sensor (see http://www.dofmaster.com/digital_coc.html)

    #define CAM_RAW_ROWPIX                  4704    // Found @0xff959c2c
    #define CAM_RAW_ROWS                    3504    // Found @0xff959c38

    #define CAM_JPEG_WIDTH                  4608    //To do
    #define CAM_JPEG_HEIGHT                 3456    //To do

    #define CAM_ACTIVE_AREA_X1              16      //To do
    #define CAM_ACTIVE_AREA_Y1              26      //To do
    #define CAM_ACTIVE_AREA_X2              4640    //To do
    #define CAM_ACTIVE_AREA_Y2              3486    //To do

    #undef  CAM_UNCACHED_BIT
    #define CAM_UNCACHED_BIT          0x40000000    // Found @0xff815f04

    #undef  CAM_SENSOR_BITS_PER_PIXEL
    #define CAM_SENSOR_BITS_PER_PIXEL       12

    #define CAM_DNG_LENS_INFO               { 50,10, 800,10, 35,10, 59,10 } // See comments in camera.h

    #define cam_CFAPattern                  0x01000201   // [Green Blue Red Green]

    // TODO C&P from D10
    #define CAM_COLORMATRIX1                             \
    827547, 1000000, -290458, 1000000, -126086, 1000000, \
    -12829, 1000000,  530507, 1000000,   50537, 1000000, \
      5181, 1000000,   48183, 1000000,  245014, 1000000
    #define cam_CalibrationIlluminant1      1       // Daylight

    #undef  CAM_USE_ZOOM_FOR_MF

    #define CAM_HAS_VIDEO_BUTTON                1
    #define CAM_HAS_MOVIE_DIGEST_MODE           1   // camera doesn't actually have digest mode, this is needed by is_video_recording
    #define CAM_IS_VID_REC_WORKS                1   // is_video_recording() function works

    #define  CAM_EXT_TV_RANGE                   1    // CHDK can make exposure time longer than 64s

    #undef  CAM_VIDEO_CONTROL
// not working
    #undef CAM_CHDK_HAS_EXT_VIDEO_MENU
//    #define CAM_VIDEO_QUALITY_ONLY            1
//    #define CAM_CHDK_HAS_EXT_VIDEO_MENU       1

    // MakeDirectory_Fut not found, using mkdir
    #define MKDIR_RETURN_ONE_ON_SUCCESS

    //aspect correction
    #undef  CAM_USES_ASPECT_CORRECTION
    #define CAM_USES_ASPECT_CORRECTION              1   //camera uses the modified graphics primitives to map screens an viewports to buffers more sized
    #undef CAM_BITMAP_WIDTH
    #define CAM_BITMAP_WIDTH                      720   // Actual width of bitmap screen in bytes

    #define CAM_LOAD_CUSTOM_COLORS                  1   // Enable loading CHDK colors into the camera palette memory/hardware

    #define CAM_HAS_JOGDIAL                         1
    #define CAM_ADJUSTABLE_ALT_BUTTON               1
    #define CAM_ALT_BUTTON_NAMES                    { "Playback", "Disp", "Video" }
    #define CAM_ALT_BUTTON_OPTIONS                  { KEY_PLAYBACK, KEY_DISPLAY, KEY_VIDEO }

    // TODO
    #undef  CAM_USB_EVENTID
    #define CAM_USB_EVENTID                         0x202 // Levent ID for USB control. Changed in DryOS R49 so needs to be overridable.

    // TODO
    #define CAM_DATE_FOLDER_NAMING                  0x400

    #define PARAM_CAMERA_NAME                       3 // parameter number for GetParameterData

    #define CAM_FILE_COUNTER_IS_VAR                 1 // file counter is variable file_counter_var in stubs, not a param

    #define  CAM_HAS_FILEWRITETASK_HOOK             1 // FileWriteTask hook is available (local file write can be prevented)
    #define  CAM_FILEWRITETASK_SEEKS                1 // Camera's FileWriteTask can do Lseek() - DryOS r50 or higher, the define could also be CAM_DRYOS_2_3_R50

    #define CAM_HAS_ZOOM_LEVER                      1 // Camera has dedicated zoom buttons
    #define CAM_NEED_SET_ZOOM_DELAY                 300 // Define to add a delay after setting the zoom position
    #define CAM_USE_OPTICAL_MAX_ZOOM_STATUS         1 // Use ZOOM_OPTICAL_MAX to reset zoom_status when switching from digital to optical zoom

//To do
//  #define REMOTE_SYNC_STATUS_LED  0xC0220130???     // specifies an LED that turns on while camera waits for USB remote to sync

    #undef  CAM_AF_LED
    #define CAM_AF_LED                          1   // Index of AF led in camera_set_led function

    #undef  CAM_KEY_PRESS_DELAY
    #define CAM_KEY_PRESS_DELAY                     120  // delay after a press - Required by zoom_in/zoom_out buttons

    #define CAM_SD_OVER_IN_AF                       1
    #define CAM_SD_OVER_IN_AFL                      1
    #define CAM_SD_OVER_IN_MF                       1

    #define  DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY      1
    
    #define CAM_DRIVE_MODE_FROM_TIMER_MODE          1

    #define CAM_3ARG_DebugAssert                1   // DebugAssert takes 3 arguments

//----------------------------------------------------------