// Camera - sx110is - platform_camera.h

// This file contains the various settings values specific to the sx110is camera.
// This file is referenced via the 'include/camera.h' file and should not be loaded directly.

// If adding a new settings value put a suitable default in 'include/camera.h',
// along with documentation on what the setting does and how to determine the correct value.
// If the setting should not have a default value then add it in 'include/camera.h'
// using the '#undef' directive along with appropriate documentation.

// Override any default values with your camera specific values in this file. Try and avoid
// having override values that are the same as the default value.

// When overriding a setting value there are two cases:
// 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
// 2. If changing the value it is best to use an '#undef' directive to remove the default value
//    followed by a '#define' to set the new value.

// When porting CHDK to a new camera, check the documentation in 'include/camera.h'
// for information on each setting. If the default values are correct for your camera then
// don't override them again in here.

    #define CAM_PROPSET                     2
    #define CAM_DRYOS                       1

    #define CAM_RAW_ROWPIX                  3720
    #define CAM_RAW_ROWS                    2772

    #define CAM_CAN_MUTE_MICROPHONE         1
    #define CAM_SHOW_OSD_IN_SHOOT_MENU      1
    #define CAM_REAR_CURTAIN                1
    #define CAM_ADJUSTABLE_ALT_BUTTON       1
    #define CAM_ALT_BUTTON_NAMES            { "Print", "Face" }
    #define CAM_ALT_BUTTON_OPTIONS          { KEY_PRINT, KEY_FACE }
    #define CAM_AF_SCAN_DURING_VIDEO_RECORD 1
    #undef  CAM_VIDEO_CONTROL
    #define CAM_MULTIPART                   1
    #define CAM_HAS_JOGDIAL                 1
    #define CAM_HAS_HI_ISO_AUTO_MODE        1
    #undef  CAM_USE_ZOOM_FOR_MF
    #undef  CAM_SENSOR_BITS_PER_PIXEL
    #define CAM_SENSOR_BITS_PER_PIXEL       12
    // black level set to 128 per reports on the forum
    #undef  CAM_BLACK_LEVEL
    #define CAM_BLACK_LEVEL                 128
    #define PARAM_CAMERA_NAME               4       // parameter number for GetParameterData

    #define CAM_DNG_LENS_INFO               { 60,10, 600,10, 28,10, 43,10 } // See comments in camera.h
    #define cam_CFAPattern                  0x02010100 // Red  Green  Green  Blue
	#define CAM_COLORMATRIX1                               \
      530200, 1000000, -42600,  1000000, -33000,  1000000, \
     -525400,  1000000, 1092700,  1000000,  223700,  1000000, \
     -103700,  1000000, 117900,   1000000,  421600,  1000000

    #define CAM_ACTIVE_AREA_X1 8
    #define CAM_ACTIVE_AREA_Y1 14
    #define CAM_ACTIVE_AREA_X2 3688
    #define CAM_ACTIVE_AREA_Y2 2772
    #define cam_CalibrationIlluminant1      1       // Daylight
    #define CAM_JPEG_WIDTH                  3456
    #define CAM_JPEG_HEIGHT                 2592

    #define CAM_HAS_FILEWRITETASK_HOOK      1

   //#define REMOTE_SYNC_STATUS_LED  0xC0xxyyyy  // specifies an LED that turns on while camera waits for USB remote to sync

    // Warning : SD override for this camera with these values has not been tested
    #define CAM_CAN_SD_OVERRIDE_UNKNOWN_STATUS 1
    #define CAM_SD_OVER_IN_AF               1
    #define CAM_SD_OVER_IN_AFL              1
    #define CAM_SD_OVER_IN_MF               1

    #define CAM_IS_VID_REC_WORKS            1   // is_video_recording() function works
    
//--------------------------------------------------

    #undef  CAM_DEFAULT_MENU_CURSOR_BG
    #undef  CAM_DEFAULT_MENU_CURSOR_FG
    #define CAM_DEFAULT_MENU_CURSOR_BG  IDX_COLOR_RED      // Override menu cursor colors
    #define CAM_DEFAULT_MENU_CURSOR_FG  IDX_COLOR_WHITE    // Override menu cursor colors