// Camera - ixus30_sd200 - platform_camera.h

// This file contains the various settings values specific to the ixus30_sd200 camera.
// This file is referenced via the 'include/camera.h' file and should not be loaded directly.

// If adding a new settings value put a suitable default in 'include/camera.h',
// along with documentation on what the setting does and how to determine the correct value.
// If the setting should not have a default value then add it in 'include/camera.h'
// using the '#undef' directive along with appropriate documentation.

// Override any default values with your camera specific values in this file. Try and avoid
// having override values that are the same as the default value.

// When overriding a setting value there are two cases:
// 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
// 2. If changing the value it is best to use an '#undef' directive to remove the default value
//    followed by a '#define' to set the new value.

// When porting CHDK to a new camera, check the documentation in 'include/camera.h'
// for information on each setting. If the default values are correct for your camera then
// don't override them again in here.

    #define CAM_PROPSET                         1

    #define CAM_RAW_ROWPIX                      2144
    #define CAM_RAW_ROWS                        1564

    #undef  CAM_HAS_ERASE_BUTTON
    #undef  CAM_HAS_IRIS_DIAPHRAGM
    #define CAM_HAS_ND_FILTER                   1
    #undef  CAM_HAS_MANUAL_FOCUS
    #undef  CAM_HAS_USER_TV_MODES
    #define CAM_SHOW_OSD_IN_SHOOT_MENU          1
    #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO
    #undef  CAM_AF_SCAN_DURING_VIDEO_RECORD     //placeholder
    #undef  CAM_VIDEO_CONTROL
    #define CAM_VIDEO_QUALITY_ONLY              1
    #define CAM_DRAW_EXPOSITION                 1

    #undef  CAM_HAS_IS
    #define CAM_MIN_ISO_OVERRIDE                51 // crashes when set to a lower value (not flash related)

    #define CAM_DNG_LENS_INFO                   { 58,10, 174,10, 28,10, 49,10 } // See comments in camera.h
    // pattern
    #define cam_CFAPattern 0x02010100 // Red  Green  Green  Blue
    // color
    #define CAM_COLORMATRIX1                                 \
      652674,  1000000, -172074, 1000000, -107575,  1000000, \
      -139063, 1000000, 594517,  1000000,  60252,   1000000, \
      -9088,   1000000, 82013,   1000000,  238080,  1000000

    #define cam_CalibrationIlluminant1          1 // Daylight
    // cropping
    #define CAM_JPEG_WIDTH                      2048
    #define CAM_JPEG_HEIGHT                     1536
    #define CAM_ACTIVE_AREA_X1                  12
    #define CAM_ACTIVE_AREA_Y1                  12
    #define CAM_ACTIVE_AREA_X2                  2100
    #define CAM_ACTIVE_AREA_Y2                  1562
    // camera name
    #define PARAM_CAMERA_NAME                   2 // parameter number for GetParameterData
    #define CAM_NO_MEMPARTINFO                  1 // vxworks function missing
    #undef  CAM_FLASHPARAMS_VERSION
    #define CAM_FLASHPARAMS_VERSION             2

    // "real" to "market" conversion definitions
    #define SV96_MARKET_OFFSET                  -19          // market-real sv96 conversion value

    // Conversion values for pow(2,19/96) 'market' to 'real', and pow(2,-19/96) 'real' to 'market'
    // Uses integer arithmetic to avoid floating point calculations. Values choses to get as close
    // to the desired multiplication factor as possible within normal ISO range.
    #define ISO_MARKET_TO_REAL_MULT             18793
    #define ISO_MARKET_TO_REAL_SHIFT            14
    #define ISO_MARKET_TO_REAL_ROUND            8192
    #define ISO_REAL_TO_MARKET_MULT             3571
    #define ISO_REAL_TO_MARKET_SHIFT            12
    #define ISO_REAL_TO_MARKET_ROUND            2048

    #undef  PARAMETER_DATA_FLAG
    #define PARAMETER_DATA_FLAG                 0       // For calls to _GetParameterData & _SetParameterData

//--------------------------------------------------

    #undef  CAM_DEFAULT_MENU_CURSOR_BG
    #undef  CAM_DEFAULT_MENU_CURSOR_FG
    #define CAM_DEFAULT_MENU_CURSOR_BG  IDX_COLOR_RED      // Override menu cursor colors
    #define CAM_DEFAULT_MENU_CURSOR_FG  IDX_COLOR_WHITE    // Override menu cursor colors

    #define CAM_3ARG_DebugAssert                1   // DebugAssert takes 3 arguments

    #undef CAM_PTP_SCREEN_UNLOCK_EVENT  // cam doesn't have cameracon_state identified

//--------------------------------------------------