// Camera - ixus240hs/elph320hs - platform_camera.h // This file contains the various settings values specific to the IXUS240/ELPH320HS camera. // This file is referenced via the 'include/camera.h' file and should not be loaded directly. // If adding a new settings value put a suitable default in 'include/camera.h', // along with documentation on what the setting does and how to determine the correct value. // If the setting should not have a default value then add it in 'include/camera.h' // using the '#undef' directive along with appropriate documentation. // Override any default values with your camera specific values in this file. Try and avoid // having override values that are the same as the default value. // When overriding a setting value there are two cases: // 1. If removing the value, because it does not apply to your camera, use the '#undef' directive. // 2. If changing the value it is best to use an '#undef' directive to remove the default value // followed by a '#define' to set the new value. // When porting CHDK to a new camera, check the documentation in 'include/camera.h' // for information on each setting. If the default values are correct for your camera then // don't override them again in here. #define CAM_PROPSET 5 #define CAM_DRYOS 1 #define CAM_DRYOS_2_3_R39 1 // Defined for cameras with DryOS version R39 or higher #define CAM_DRYOS_2_3_R47 1 // Defined for cameras with DryOS version R47 or higher #define CAM_RAW_ROWPIX 4784 // Found @0xff1b1290 #define CAM_RAW_ROWS 3516 // Found @0xff1b129c #undef CAM_UNCACHED_BIT #define CAM_UNCACHED_BIT 0x40000000 // Found @0xff03b324 ixus240 #define CAM_JPEG_WIDTH 4680 #define CAM_JPEG_HEIGHT 3498 #define CAM_ACTIVE_AREA_X1 96 #define CAM_ACTIVE_AREA_Y1 18 #define CAM_ACTIVE_AREA_X2 4776 #define CAM_ACTIVE_AREA_Y2 3516 #undef CAM_EMUL_KEYPRESS_DURATION #define CAM_EMUL_KEYPRESS_DURATION 10 #undef CAM_USE_ZOOM_FOR_MF #define CAM_BRACKETING 1 #undef CAM_VIDEO_CONTROL #define CAM_VIDEO_QUALITY_ONLY 1 //#define CAM_EV_IN_VIDEO 1 //#define CAM_SHOW_OSD_IN_SHOOT_MENU 1 //#define CAM_QUALITY_OVERRIDE 1 #define CAM_HAS_CMOS 1 #define CAM_HAS_ND_FILTER 1 #undef CAM_HAS_ERASE_BUTTON // No erase button #undef CAM_HAS_MANUAL_FOCUS // No manual focus mode #undef CAM_CAN_UNLOCK_OPTICAL_ZOOM_IN_VIDEO #undef DEFAULT_RAW_EXT #define DEFAULT_RAW_EXT 2 // use .CR2 #undef CAM_TS_BUTTON_BORDER #define CAM_TS_BUTTON_BORDER 60 // Define this to leave a border on each side of the palette display. Used on the IXUS 310 to // stop the palette from overlapping the on screen buttons on each side #undef CAM_DISP_ALT_TEXT // Turn off at bottom of screen in Alt mode - changes button color instead #define CAM_TOUCHSCREEN_UI 1 // Enable touch screen U/I // camera name #define PARAM_CAMERA_NAME 4 // parameter number for GetParameterData - Camera Model name #define PARAM_OWNER_NAME 7 // parameter number for GetParameterData - Owner name #define PARAM_DISPLAY_MODE1 60 // param number for LCD display mode when camera in playback #define PARAM_DISPLAY_MODE2 64 // param number for LCD display mode when camera in record view hold mode #undef CAM_SENSOR_BITS_PER_PIXEL #define CAM_SENSOR_BITS_PER_PIXEL 12 #undef CAM_USES_ASPECT_CORRECTION #define CAM_USES_ASPECT_CORRECTION 1 //camera uses the modified graphics primitives to map screens an viewports to buffers more sized #undef CAM_SCREEN_WIDTH #undef CAM_BITMAP_WIDTH #undef CAM_BITMAP_HEIGHT #define CAM_SCREEN_WIDTH 480 // Width of bitmap screen in CHDK co-ordinates #define CAM_BITMAP_WIDTH 960 // Actual width of bitmap screen in bytes (may be larger than displayed area) #define CAM_BITMAP_HEIGHT 270 // Actual height of bitmap screen in rows (240 or 270) #undef EDGE_HMARGIN #define EDGE_HMARGIN 2 // bayer sensor pattern #define cam_CFAPattern 0x02010100 // Red Green Green Blue #define CAM_DNG_EXPOSURE_BIAS 0,1 // Specify DNG exposure bias value to 0 (to override default of -0.5 in the dng.c code) #define CAM_DNG_LENS_INFO { 43,10, 215,10, 27,10, 59,10 } // See comments in camera.h ixus240 #define cam_CalibrationIlluminant1 1 #define CAM_COLORMATRIX1 \ 544808, 1000000, -174047, 1000000, -80399, 1000000, \ -75055, 1000000, 440444, 1000000, 11367, 1000000, \ -5801, 1000000, 71589, 1000000, 118914, 1000000 // Look into updating #define CAM_ZEBRA_ASPECT_ADJUST 1 #define CAM_DATE_FOLDER_NAMING 0x400 #define CAM_DRIVE_MODE_FROM_TIMER_MODE 1 // use PROPCASE_TIMER_MODE to check for multiple shot custom timer. // Used to enabled bracketing in custom timer, required on many recent cameras // see http://chdk.setepontos.com/index.php/topic,3994.405.html // #define CAM_AV_OVERRIDE_IRIS_FIX 1 // for cameras that require _MoveIrisWithAv function to override Av in bracketing. #undef CAM_HAS_IRIS_DIAPHRAGM #define CAM_DISABLE_RAW_IN_LOW_LIGHT_MODE 1 // For cameras with 'low light' mode that does not work with raw define this #define CAM_HAS_MOVIE_DIGEST_MODE 1 // Changes the values in the 'movie_status' variable if the camera has this mode #define CAM_LOAD_CUSTOM_COLORS 1 // Enable loading CHDK colors into the camera palette memory/hardware #undef CAM_USB_EVENTID #define CAM_USB_EVENTID 0x202 // Levent ID for USB control. Changed in DryOS R49, R50 so needs to be overridable. #define MKDIR_RETURN_ONE_ON_SUCCESS 1 // mkdir() return 1 on success, 0 on fail. #define CAM_HAS_FILEWRITETASK_HOOK 1 #define CAM_FILEWRITETASK_SEEKS 1 #define CAM_CHDK_HAS_EXT_VIDEO_TIME 1 // Warning : SD override for this camera with these values has not been tested #define CAM_CAN_SD_OVERRIDE_UNKNOWN_STATUS 1 #define CAM_SD_OVER_IN_AF 1 #define CAM_SD_OVER_IN_MF 1 #define CAM_HAS_WIFI 1 // Camera has wifi support //--------------------------------------------------