// Camera - D30 - platform_camera.h

// This file contains the various settings values specific to the D30 camera.
// This file is referenced via the 'include/camera.h' file and should not be loaded directly.

// If adding a new settings value put a suitable default in 'include/camera.h',
// along with documentation on what the setting does and how to determine the correct value.
// If the setting should not have a default value then add it in 'include/camera.h'
// using the '#undef' directive along with appropriate documentation.

// Override any default values with your camera specific values in this file. Try and avoid
// having override values that are the same as the default value.

// When overriding a setting value there are two cases:
// 1. If removing the value, because it does not apply to your camera, use the '#undef' directive.
// 2. If changing the value it is best to use an '#undef' directive to remove the default value
//    followed by a '#define' to set the new value.

// When porting CHDK to a new camera, check the documentation in 'include/camera.h'
// for information on each setting. If the default values are correct for your camera then
// don't override them again in here.

    #define CAM_DRYOS                       1
    #define CAM_PROPSET                     5

    #define CAM_DRYOS_2_3_R39               1       // Defined for cameras with DryOS version R39 or higher
    #define CAM_DRYOS_2_3_R47               1       // Defined for cameras with DryOS version R47 or higher

    #define CAM_RAW_ROWPIX                  4168    // Found @0xff1469c4  d20
    #define CAM_RAW_ROWS                    3060    // Found @0xff1469d0  d20

    #undef  CAM_UNCACHED_BIT
    #define CAM_UNCACHED_BIT                0x40000000

    #define CAM_JPEG_WIDTH                  4000
    #define CAM_JPEG_HEIGHT                 3000
    #define CAM_ACTIVE_AREA_X1              92    	// to image data, border extends to 120
    #define CAM_ACTIVE_AREA_Y1              16      // to image data, border extends to 34
    #define CAM_ACTIVE_AREA_X2              4164    // last image data, border at 4136
    #define CAM_ACTIVE_AREA_Y2              3060    // image data extends to bottom, border starts 3042?

    #define CAM_DNG_LENS_INFO               { 50,10, 250,10, 39,10, 48,10 } // See comments in camera.h

    #undef  CAM_SENSOR_BITS_PER_PIXEL
    #define CAM_SENSOR_BITS_PER_PIXEL          12

    #define cam_CFAPattern             0x02010100 // [Red Green Green Blue]

    #define CAM_COLORMATRIX1                             \
    827547, 1000000, -290458, 1000000, -126086, 1000000, \
    -12829, 1000000,  530507, 1000000,   50537, 1000000, \
      5181, 1000000,   48183, 1000000,  245014, 1000000

    #define cam_CalibrationIlluminant1          1   // Daylight

    #undef  CAM_USES_ASPECT_CORRECTION
    #define CAM_USES_ASPECT_CORRECTION          1   //camera uses the modified graphics primitives to map screens an viewports to buffers more sized
    #undef  CAM_BITMAP_WIDTH
    #undef  CAM_BITMAP_HEIGHT
    #define CAM_BITMAP_WIDTH                  960   // Actual width of bitmap screen in bytes
    #define CAM_BITMAP_HEIGHT                 270   // Actual height of bitmap screen in rows
    #undef  EDGE_HMARGIN
    #define EDGE_HMARGIN                       10

    #define CAM_HAS_FILEWRITETASK_HOOK          1
    #define CAM_FILEWRITETASK_SEEKS             1

    #define CAM_ZEBRA_NOBUF                     1

    #define PARAM_CAMERA_NAME                   4   // parameter number for GetParameterData

    #define CAM_HAS_ND_FILTER                   1
    
    #define CAM_EXT_TV_RANGE                    1

    #define CAM_HAS_VIDEO_BUTTON                1
    #undef  CAM_VIDEO_CONTROL
    #define CAM_VIDEO_QUALITY_ONLY              1

    #undef  CAM_HAS_IRIS_DIAPHRAGM
    #undef  CAM_HAS_ERASE_BUTTON
    #undef  CAM_HAS_MANUAL_FOCUS

    #define CAM_HAS_GPS                         1

    #define CAM_HAS_MOVIE_DIGEST_MODE           1

    #define CAM_LOAD_CUSTOM_COLORS              1   // Enable loading CHDK colors into the camera palette memory/hardware

    #undef  CAM_DEFAULT_ALT_BUTTON
    #define CAM_DEFAULT_ALT_BUTTON              KEY_PLAYBACK
    #undef  CAM_HAS_DISP_BUTTON
    #define CAM_DISP_BUTTON_NAME                "Video"
    #define SHORTCUT_TOGGLE_RAW                 KEY_VIDEO

    #define CAM_FIRMWARE_MEMINFO                1

// TO DO
    #define CAM_HAS_ZOOM_LEVER                  1    // Camera has dedicated zoom buttons
//    #define CAM_USE_ZOOM_FOR_MF              1    // Zoom lever can be used for manual focus adjustments    
    #define CAM_NEED_SET_ZOOM_DELAY           300    // Define to add a delay after setting the zoom position
    #define CAM_USE_OPTICAL_MAX_ZOOM_STATUS     1    // Use ZOOM_OPTICAL_MAX to reset zoom_status when switching from digital to optical zoo

    #define CAM_QUALITY_OVERRIDE             	1
    #define CAM_DATE_FOLDER_NAMING          	0x400

    #define DRAW_ON_ACTIVE_BITMAP_BUFFER_ONLY   1

    #undef  CAM_USB_EVENTID
    #define CAM_USB_EVENTID                 0x202   // Levent ID for USB control. Changed in DryOS R49, R50 so needs to be overridable.
    #define MKDIR_RETURN_ONE_ON_SUCCESS         1   // mkdir() return 1 on success, 0 on fail.

//	#define REMOTE_SYNC_STATUS_LED 	0xC0220130		// TODO specifies an LED that turns on while camera waits for USB remote to sync
 
    #define CAM_SD_OVER_IN_AF  1
    #define CAM_SD_OVER_IN_MF  1

    #define CAM_IS_VID_REC_WORKS                1   // is_video_recording() function works
 
//--------------------------------------------------